Company Name

Contact

Contact Number

Material maximum format (width & length)

Minimum material width (width & length)

Material Thickness Range

Material

Cardboard □Thin paper □Grey board □Corrugated □Plastic sheet □Other

Remark:

Conveying speed (sheets/hour or m/min)

Feeder requirements

□Aberration correction

□ Manual up and down □ Manual front and rear □ Manual left and right

□Automatic up and down □Automatic front and rear

Remark:

Paper table correction

□Manual correction □Automatic correction □No correction

Remark:

Side stop

□ Manual adjustment of the top side stop □ Manual adjustment of the full length side stop

□Automatic adjustment of top side stop

Remark:

Double sheet detection

□ Required □ Not required

Remark:

Paper feed table

Paper belt: □ Ordinary paper belt □ Negative pressure paper belt

Angle: □ Horizontal □ Inclination □ Change with the host

Paper table support: □Gas spring □Fixed

Remark:

Press box

□Manual □Quick adjustment □Automatic

Remark:

Foreign body detection

□Need □No need to intercept foreign objects

Remark:

Side gauge

□Required □Not required □Requires operation side □Requires transmission side

Remark:

Pre-rule

□ Required □ Not required

Remark:

Non-stop refilling

□ Required □ Not required

Remark:

Pre-stacked paper

□Outside the machine door □The machine moves the door □The machine opens the door No need

Remark:

Power and Paper Step

Power source:

□From the host □Independent motor

Remark:

Main engine power output direction:

□Same direction as conveying direction □Reverse conveying direction □Refer to drawing

Remark:

The power connection method of the two machines:

□Chain □Timing belt □Shaft drive □Leave the shaft head

Remark:

Paper Step:

□Constant □Stepless adjustment □Single overlapping two steps

Remark:

Clutch

□Electromagnetic clutch □Pneumatic clutch

No clutch required

Remark:

Before the paper arrives, it is adjusted in the morning and evening

□Manual □Automatic □Not required

Remark:

Auxiliary configuration

□Static eliminator □Ion blower □Anti-floating cable

Remark:

Cover

□ Required □ Not required

Remark:

Electrical requirements

□Leave the position for installing the switch (except the necessary switch)

□ Just install the switch □ Install the switch and lead the line into the junction box

Leaving the motor installation position to provide the motor

Remark:

Air requirements

(Vacuum pumps, blowers, and air compressors should be equipped by the user and informed of the necessary data related to Jucheng)

□Vacuum pump is turned on at a fixed point □Negative pressure solenoid valve

Side blower connected to vacuum pump

Side blower with separate blower

Side blowing with separate compressed air

Remark:

Feeder Color

Other needs